- 首 页
- 关于我们
- 认证咨询
AS9100D AS9110C AS9120B IATF16949:2016 ISO13485:2016 ISO14001:2015 ISO9001:2015 ISO45001:2018 Nadcap特殊认证 ISO20000:2018 ISO27001:2013 GJB9001:2017 ISO28000:2018 ISO 26262:2018 ISO27001:2013 ISOTS22163:2017 ISO50001:2018 ISO22000:2018 SA8000:2014 TL9000(2019-R6.2版) EN15085:2011 GB-T50430:2017 IECQ/QC080000:2018 ISO22716:2007 ISO3834国际焊接体系 ISO37001:2017 ISO15378:2017 ISO22301:2019 ISO/17025:2017 ISO14064:2018 绿色供应链认证 AS6081:2012 AS6496:2014 ISOTS 22163:2017 ISO10012 TPG交通和能源 ISO17000:2015翻译认证
- 管理咨询
- 新闻中心
- 核心团队
- 证书查询
- 联系我们
- 招聘人才
- 线上课程
- 长沙AS9100D质量管理体系 对于航空、航天以及国防组织的要求1范围
质量管理体系–要求
1、范围
本标准包括了ISO9001:2015质量管理体系要求并规定了航空、航天和国防工业的附加要求、定义和注释。
必须强调,本标准所规定的质量管理体系要求是对客户和适用法律法规要求的补充(不是替代)。
如果本标准的要求与客户、适用法律或法规之间有冲突,则以后者为准.
本标准为下列组织规定了质量管理体系要求:
a. 需要证实其具有持续地提供满足顾客要求和适用法律法规要求的产品和服务的能力;
b.通过体系的有效应用,包括体系改进的过程,以及保证符合顾客和适用的法律法规要求,旨在增强顾客满意。
本标准规定的所有要求是通用的,旨在适用于各种类型、不同规模和提供不同产品和服务的组织。
注 1:在本标准中,术语“产品”或“服务”仅适用于预期提供给顾客或顾客所要求的产品和服务
注 2:法律法规要求可称作法定要求。
1、Scope
This standard includes ISO 9001:2015 2 quality management system requirements and specifies additional aviation, space, and defense industry requirements, definitions, and notes.
It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this standard and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an organization:
a. needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b. aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.
NOTE 1 In this International Standard, the terms “product” or “service” only apply to products and services intended for, or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.