- 首 页
- 关于我们
- 认证咨询
AS9100D AS9110C AS9120B IATF16949:2016 ISO13485:2016 ISO14001:2015 ISO9001:2015 ISO45001:2018 Nadcap特殊认证 ISO20000:2018 ISO27001:2013 GJB9001:2017 ISO28000:2018 ISO 26262:2018 ISO27001:2013 ISOTS22163:2017 ISO50001:2018 ISO22000:2018 SA8000:2014 TL9000(2019-R6.2版) EN15085:2011 GB-T50430:2017 IECQ/QC080000:2018 ISO22716:2007 ISO3834国际焊接体系 ISO37001:2017 ISO15378:2017 ISO22301:2019 ISO/17025:2017 ISO14064:2018 绿色供应链认证 AS6081:2012 AS6496:2014 ISOTS 22163:2017 ISO10012 TPG交通和能源 ISO17000:2015翻译认证
- 管理咨询
- 新闻中心
- 核心团队
- 证书查询
- 联系我们
- 招聘人才
- 线上课程
- AS9100D质量管理体系 对于航空、航天以及国防组织的要求0.3.2策划 实施 检查 处置循环
简介
0.3.2 策划-实施-检查-处置循环
PDCA循环能够应用于所有过程以及完整的质量管理体系。图2表明了本标准第4章至第10章如何组成PDCA循环。
PDCA循环可以简要描述如下:
——策划:根据顾客的要求和组织的方针,建立体系的目标及其过程,确定实现结果所需的资源,并识别和应对风险和机遇。
——实施:实施所做的策划;
——检查:根据方针、目标、要求和经策划的活动,对过程以及形成的产品和服务进行监视和测量(适用时),并报告结果;
——处置:必要时,采取措施提高绩效。
图2:本标准的结构在PDCA循环中的展示(略)注:括号中的数字表示本标准的相应章节。
0.3.2 Plan-Do-Check-Act Cycle
The PDCA cycle can be applied to all processes and to the quality management system as a whole. Figure 2 illustrates how clauses 4 to 10 can be grouped in relation to the PDCA cycle.
The PDCA cycle can be briefly described as follows:
—— Plan: establish the objectives of the system and its processes, and the resources needed to deliver results in accordance with customers’ requirements and the organization’s policies, and identify and address risks and opportunities;
—— Do: implement what was planned;
—— Check: monitor and (where applicable) measure processes and the resulting products and services against policies, objectives, requirements, and planned activities, and report the results;
—— Act: take actions to improve performance, as necessary.
Figure 2 – Representation of the structure of this International Standard in the PDCA cycle
NOTE: Numbers in brackets refer to the clauses in this International Standard.